Pollution Control

Click the link to view the Leaflet:


High purity alumina nozzles for flue-gas desulfurization equipment

AAP-AL92 series

Hollow Cone Spray Nozzles

Features


  • Entire nozzle is made of alumina ceramic having excellent wear-resistance and corrosion resistance.
  • Suitable for slurry spray such as lime-gypsum method and magnesium hydroxide method.
  • AAP-AL92 series and AJP-AL92 series are designed with no whirler inside of the nozzles, providing large free passage diameter and minimizing clogging.



Delivering results in:


  • Coal-fired power plants
  • Iron and steel plant manufacturers
  • Paper and pulp plant manufacturers
  • Chemical plant manufacturers
  • Water granulation equipment
  • Cleaning towers

JUXP-AL92 series

Hollow Cone Spray Nozzles

AJP-AL series

Hollow Cone Spray Nozzles


Spray nozzles for gas cooling

GBIM series

Pneumatic Fine Mist Nozzles

Features


  • Multistep atomization structure yields average droplet of 60 um, spray capacity of 700 l/hr at an air-water ratio of 100 (GBIM series).
  • Reduces running cost with low air-water ratio operation.
  • Ikeuchi provides a wide range of gas cooling nozzles such as fine atomization pneumatic nozzle (GBIM series), our best-selling superior cost performance pneumatic nozzle (GSIMⅡ series) and high-pressure hydraulic return nozzles (GSPB series).
  • GSPB series is a large spray capacity return nozzle with a spray capacity of 167 ~ 833 l/min.



Delivering results in:


  • Waste incineration plants
  • Glass plants
  • Cement plants
  • Waste heat redcovery plants
  • Steel mills

GSIMⅡ series

(Lance type) Pneumatic Fine Mist Nozzles

GSIMⅡ series

Pneumatic Fine Mist Nozzles

GSPB series

High-Pressure Hydraulic Return Nozzles


SiC, SiSiC nozzles for flue-gas desulfurization equipment

WTAA series

Bidirectional Spray Nozzles

Features


  • Entire nozzle is made of alumina ceramic having excellent wear resistance and corrosion resistance.
  • Suitable for slurry spray such as lime-gypsum method and magnesium hydroxide method.
  • AAP-AL92 series and AJP-AL92 series are designed with no whirler inside of the nozzles, providing large free passage diameter and minimizing clogging.



Delivering results in:


  • Coal-fired power plants
  • Iron and steel plant manufacturers
  • Paper and pulp plant manufacturers
  • Chemical plant manufacturers
  • Water granulation equipment
  • Cleaning towers

TAA series

SiSiC Nozzles


Spray units for dust suppression

Before introduction

Features


  • Suppress dust dispersion in a large room space.
  • The photos at left show the actual site where the dust density was reduced by 90 %, from 1.63 mg/m2 to 0.15 mg/m2.
  • GSIM series pneumatic nozzles are capable of dust suppression without significantly wetting the environment by spraying droplet size of 40 - 80 um in large volume swiftly.



Delivering results in:


  • Industrial waste disposal
  • Transfer on conveyer line
  • Hopper inlet
  • Iron and steel rolling

After introduction

GSIM Spray Unit